Fluid Level Sensor - ELE-800-006-FRU - Upgrade Kit

ELE-800-006-FRU
Click To Enlarge

Fluid Level Sensor - ELE-800-006-FRU - Upgrade Kit

 

It is much easier to remove the (old) ELX-800-003 sensor with crowsfoot wrench.  Add crowsfoot wrench in options below. 

You will need 7/16" deep socket to tighten sensor when it is in place.

 



This upgrade kit replaces the ELX-800-003 liquid sensor that looks like the one below.

The ELX-800-003 liquid sensor is a powered sensor.  Power is supplied from the same circuit as the stir pump (pump 3).  If stir pump shorts out (should have red instead of normal green light), this sensor will shut off power to sensor and iluminate the "Low Tank Cutoff Status" light on the electronic control board.

This tank coolant level sensor was used on the following models / serial numbers:

AHE-450-DE2
AHE-450-DE3
AHE-450-DE4 Serial A450-100277 - A450-131234

AHE-450-DW1
AHE-450-DW2
AHE-450-DW3 Serial A450-100294 - A450-131242

AHE-450-DW2

AHE-400-P01
AHE-400-D01

AHE-600-D02
AHE-600-D03 A600-090001 - A600-140020

This sensor not guaranteed to work on any other models / serial numbers as it screws into 3/8" port on the boiler tank.

  * Marked fields are required.
*
Qty*
Price $146.00
Availability In-Stock